Rent a Power Step up Joiner Inverter (Reverse Converter) Takes two 115 volt outlets and allows you to use 230 volt appliances that uses under 20 amp @ 230 volts (4600 watts) Single phase current to NEMA 10-30R receptacle.

Rental Rate 24 Hours: $50.00
Optional Pick up and delivery $35 per trip.

Other 220 to 240 volt receptacles available including but not limited to: NEMA 6-30R, NEMA 6-50R, NEMA 10-30R, more

Perfect for electric pressure washers, welders, vapor steam cleaners, and other high powered equipment when 230 volt plugs are just not available.

Not for use on GFCI or LDCI 115 volt Outlets.

To use simply plug into different outlets and push the momentary button to test voltage.  If the voltage read between 220 to 240 volts you are good to go.  Not all outlet combinations will produce the correct voltage so you have to test before each use.  If you push the voltage test button and it reads 120 volts, simply re-located one of the power cords to a different location and retest.  Every job site location has the ability to provide plus or minus 230 volts.  If you use 15 amp 115 v to 120 volt circuits then you will only be able to operate 15 amp 230 volt equipment.  If your pressure washer needs 23 amps @ 230 volts and you are plugged into 20 amp 115 volt outlets, you will need to turn the pressure down to lower the amp draw.  Just turn the pressure regulator / unloader knob counter clockwise.  The less pressure, the less horse power is needed to turn the electric motor and this will lower the amp draw.  

Plastic Box is 8" X 8" X 5"
Dual 12-3 X 25 ft power cords with dual 20 amp push breakers.
250 volt analog meter
Rubber feet on bottom of box

20100823

Electrical Outlet Receptacle Tester 3 wire 120 volt

M1394

50 ft 12-3 Extension Power Cord 115 volt AX33 lets you go 100 ft between breakers