Clean Storm 20180330 Universal Vacuum Booster SBM-Booster (Machine Mount) REPLACEMENT DOME ONLY

Description: repair part only

.

Works with almost every brand extractor including but not limited to:
Mytee, Breeze, Sandia Plastic, Hydroforce, MasterBlend, Century 400 Diamondback, Drieaz, PowerFlite, Prochem, Castex, Intrepid, Nilfisk Multi HSC 585, Prospector, and US Products






Universal Vacuum Booster for Carpet and Upholstery Cleaning Machines New easy install vacuum booster adds the performance you always wanted at a reasonable price.
This will get carpet drier and allow you to operate at longer lengths of hose without suction loss.
Fits on any portable that uses a black twist lock or 6" clear screw in lid.  For portables with 6" clear screw in lid, simply remove your clear 6" screw in lid and replace it with this screw in booster.   Portables with the black twist lock lid, this booster includes the replacement outer black ring to convert to a 6" screw in lid.  When converting machines with a black twist and lift lid to screw in lid, we recommend you purchase an additional clear screw in lid (link below.) or simply use butterfly bolts or fender washers to grab the plastic all the way around the lip opening.

Please note that boosters will increase you CFM of you machine an not the max inches of lift.   Booster will increase you "use" inches of lift not your max inches of lift.  Max inches of lift is taken at zero cfm, "use" inches of lift means with 100 feet of hose with a wand lip on the carpet (fabric) that is a leaking air through and around that fabric (not a perfect seal.)  Booster will usually double you maximum hose length for cleaning and decrease your dry times. 
Ear protection recommended if using in the same room as the cleaning.
Learn about boosters in our forum HERE

Installed or provided parts:

Optional Electro Motor: Model Q6600-090A-MP-26 3 stage, 120V Flat Fan-Vacuum Motor

Optional Extension Power Cord 14-3 X 25 feet Heavy duty Mytee E532 D16614025 SW141 315-05

Optional Clean Storm Panel Mount 15 amp push button resettable breakers PP140624 PP33-900236 PHY018-003

Optional 6 inch Waste Tank Lid Universal Vacuum Lid Flat top (this is the base of the system) When converting from Black Twist Lid to screw in lid, be sure to purchase and extra lid so you can continue to use your machine without the booster.

Optional Switch Toggle Stainless W/ Spade Connect Single Pole Single Throw Approved for 20 amp 125 volts or 12 amps 250 volts SPST 39008774507

Optional  Add Vacuum Motor Lint Screen Filtration and Gasket to any vacuum motor

Optional Gasket for 5.7" Vacuum Motor 1/8" Thick 5.5" OD X 4" ID 035-207-00

Optional Cord Male Pigtail 12-3 13 inches over all length 10-0838

Video

Optional Parts

2" Barbed X 1-1/2" Mip Plastic Connector Converts your 1.5" ported portable to 2" port for using 2" vacuum hose.

Other Styles of vacuum boosters