The Drill-Powered Air Duct Cleaning Tool That

BRUSHES AND VACUUMS! 

"Great customer service, good product!" vhv73/eBay

Start your own AIR DUCT CLEANING BUSINESS without spending thousands!

It has been fully tested and is ready for residential/light-commercial air duct cleaning.

1. Attach a drill (included) to the Motobrush drill adapter.  Clean multiple houses on a single charge!  Any 12 or 18 volt clutched drill or any plug in clutched drill will work.
2. Attach vacuum/ included (shop vac, commercial vac, industrial vac, portable or truckmount carpet extractor) to the Motobrush 1.5" outlet barb.  We recommend that you use with a vacuum that has a rating of 150 CFM or more for optimum performance.  In line Dustdowner is required when using with a portable or truck mount carpet extractor.
   
3. Rotate the brush forward on the way into the vent/duct and reverse on the way out.  Dust is dislodged and collected simultaneously!

FEATURES:

• 33' X 1.5" MOTOBRUSH Tool Assembly - Capable of cleaning distances up to 25' from each access point.  Lightweight and easy to operate!  No messy wires to get tangled or heavy equipment to lift up/down stairs and into attics or crawlspaces.  With the included tool to vacuum hose, the vacuum can be left in one central location 25' away from the operator!  This makes cleaning multiple vents easier compared to bulky all-in-one systems.
• 12" Nylon Button Brush - Cleans it all (round, square or rectangular) and is safe for use on all types of duct work.  Capable of cleaning ducts up to 12" X 24".  No need to carry an arsenal of brushes!  Brush design enables the Motobrush to collect dust that is dislodged ahead of the brush as well as behind it.  This eliminates pushing the dust further into the system and cross-contamination.   *For larger duct work check out the 18" 862052 Nylon Brush or 24" 860253 Nylon Brush.  *For dryer vents check out the 4" 862049 Dryer Vent Brush.
• No air compressor needed! Can work with any vacuum! Does not take up a lot of room!

PACKAGE INCLUDES:

-Air Duct Cleaners Foot Pedal Switch OFF Momentary ON 20180913 Watch video on link Foot pedal control to on and off your drill leaving both hands free.

Clean Storm CE1958D Cable Drive Vac Hose 1.5 X 33 ft W/12 inch Button Brush for Air Duct Cleaning Watch video on link

-Clean Storm HEPA Triple Vacuum 3 Motor Triple Filter Wet Dry Shop Vac 20 Gallon Tank w/ Tool Kit 120v 20140606 - Extended Warranty + No Extended Warranty 288 CFM Includes accessory tools HEPA filtration means it is OK to take indoors Watch video on link

Ironton 46178 Corded Electric Clutch 3/8 Portable Drill Watch Video on Link Adjustable speed Adjustable direction Locking button  Please use Velcro Strap over the trigger to achieve max 320 rpm brush speed

OPTIONAL:

Clean Storm Basic 1.5 Inch Dustdowner (sprays water inside vacuum hose) 54676552

Nikro 862049 - 4in Round Nylon Dryer Button Brush

Nikro 862050 - 8" Round Nylon Button Brush

Nikro 862051 - Replacement 12" Round Nylon Button Brush

Nikro 862052 - 18in Round Nylon Button Brush

Nikro 862053 - 24in Round Nylon Button Brush

Nikro 861283 - Replacement Drill Adapter

Color of vacuum hose is not guaranteed.

Motobrush Air Duct Cleaning Rules to clean by:

1. Do not use the tool with more than 360 degrees of bends or turns in it.  
2. Do not leave hose coiled up during use.  Example have the Motobrush travel from the drill, down the hall or room and back up into the duct. 
3. Use a clutched drill when possible.  Set the drill to the lowest clutch setting so the clutch will engage if you hit any obstructions in the duct.
4. Use Velcro strap over drill trigger to set the brush speed to under 320 RPM's.(1000 - 2000 rpm will break the cable)

https://www.steam-bright.net/showthread.php?1408-What-can-I-use-with-a-Truck-Mounted-Carpet-Cleaning-Machine

Compare to current or past OEM associations:
Air Care AC2011C Cobra 5 Reversible Duct Cleaning System Control Box only SACOB0038 (discontinued by factory)