Clean Storm Pump Pressure Feed Conversion Kit (Dealer installed)

Convert your suction feed portable carpet cleaning machine into auto fill pressure feed system.  In order for us to dealer install this option on your portable, we have to have your portable at our location in San Antonio, TX. 

Pressure feeding advantages:
Clean with about 75 psi more 'use pressure' (with trigger squeezed on tools)
Clean with about 10 degree F more water temperature (water does not sit in the fresh tank and cool down)
You can clean with larger jets or more jets without as much pressure drop off during 'use' pressure.
No need to have to refill your carpet cleaning machine every 10 to 20 minutes. 
Can be installed on all makes and models of portable carpet cleaning machine.
Clean 21% faster. 


This is some of the parts included and need to convert your carpet cleaning machine from suction feed to pressure feed.

Includes:
(2) 1/2in Mip X 3/8in Hose Barb Brass - 8.705-103.0
(1) Brass Y Strainer Filter 3/8in Stainless Screen 8.709-957.0 [87099570]
(10) ft of 3/8" ID 800 psi burst, 200 degree hot water hose (not shown) Cut in half to two 5 ft sections. 00114606200
(5) ft of 1/2" ID 800 psi burst, 200 degree hot water hose (not shown) 00114608200
4 hose feral
(1) 140 safety water temp sensor with 1/8" Mip X 1/4" barbed connector automatically keeps the water at a max temperature of 140 degrees 87072540
(1) 3/8" Mip X 3/4" FGH Swivel with gasket 30048
(2) 3/8" Mip X 3/8" Fip Street 90 BR284
(1) 3/8" Fip 4 Way cross  6FP-BCross
(2) 3/8" Mip X 3/8" barbed  BR022
(2) 1/4" Mip X 1/4" Female Socket flow through QD 98021650 or similar
(1) 1/4" Fip X 1/4" Female Socket Flow through QD  8.707-103.0
(2) 1/4" Mip X 3/8" barbed  BR020
(2) 1/4" Fip X 1/4" Male Plug Flow through QD  87071380
(1) 1/4" Mip X 1/4" Fip Street 90  BR282
(1)1/4" Mip X 1/4" Fip Extender  3200X4
(4)  Brass Ferrule .656 inches X 1 inches Long X .025 Gauge Common for 3/8in ID Hose 32566

 

All the 1/2" suction hoses in the motor box are changed out to the hot water rated pressure hoses.
Clean and silicone glue shut the 1/2" barbed clear blow pump filter in motor box.
Remove 1/4" Acorn Strainer from bottom of fresh water tank and install on 1/4" Mip X 1/4" Fip Socket Flow through QD
Install 1/4" Male Socket QD / 90 /extender to the location that the acorn stainer once sat.
Install 1/4" Mip X 1/4" Female Flow Through QD on return hole from pump bypass in bottom of fresh water tank. 
Naturally for us to do this work on your machine, the machine has to ship from San Antonio, Texas.  If it is a drop ship from a factory, you will have to purchase the self install kit. 

You are all set!  If you you want to suction feed and use the fresh water tank, you just remove the direct connect hoses and snap in the acorn strainer on the QD.
If you want to pressure feed your pump, just remove the acorn strainer and install you twin 5 ft hoses up to the faucet adaptor.
Easily toggle back and forth between pressure feeding and suction feeding your pump. 
Easily toggle back and forth between using the fresh tank or direct connect. 
Conversion can be done on all makes and models of portable carpet cleaning machines. 
140 water sensor monitors your incoming and circulating water temperature to make sure that you stay under the 140 degree mark that is safe for pump head seals.   You can optionally add 1/4" Id hose to the sensor barbed connectors but as of right now just point the outbound barbed fitting into the sink. 

Optional:
Self install this kit for you in your machine $150.00  (we just ship you all the parts)

Super Hot water option:

General Pump 347091 Water Filter 3/4" F Garden Hose Swivel X 3/8" Mip  Replace standard 3/4" Female garden hose swivel and motor box filter with hot water, high pressure filter. With this option the motor box filter is removed.

Also:

Clean Storm

AutoFillKit

Clean Storm Automatic Fill Kit for Carpet and Tile Cleaning Machines

Testimonial:

"I have direct connect and I have the unit working great, and I'm really enjoying it's functionality since this is my first ever extractor.  Primarily currently using it for upholstery cleaning with the awesome dri-master tool, and will be ordering a carpet and a tile wand in the near future.  thanks, Barry"

What are the best features to look for in a portable tile and carpet cleaning machine?