A-Plus+ Heavy Duty Rotary Turbo Nozzle For HOT Water and 5100psi
HUGE SALE - REGULAR PRICE $101.00! New units are being sold for less than the repair kits!
Works with all pressures between 500 psi to 5100 psi
Heavy Duty Construction with upgraded seals for hot water and higher pressures.
0 degree spray rotates at a 25 degree pattern.
Available in a gpm flow rates from 2.5 to 9
Works with both cold and hot pressure washers with water at 212 degrees.
Supplies the power of zero degrees but rotates at up to 5000 rpm. No gears, no teeth, and no bearings to minimize start up impact and damage.
Note gpm flow rates are calculated at 4000 psi as less pressure means less flow and more pressure is more flow.
Caution: Not for use on painted or softer surfaces (example car's exterior)
Please note turbo nozzles can harm you if you get near any body parts/ skin. Will also cut through wood and shoes!
This part number 5.5 gpm
Default color of plastic is black but the color is not guaranteed.
Tips:
1. Start turbo nozzles in the downward position and then raise lance to higher level.
2. Installation can direct onto a lance, with an optional male 1/4" QC Plug, or with an optional filter and plug combination. (see below) You can even pair more than one together with a "Y" or "T" brass fittings.
Please note the filter is highly recommended with use on HOT pressure washers as rust in the nozzle with jam up the rotary action.
    
Question: If my hot pressure washer is set to 240 degrees F, is it OK to use this nozzle?
Answer: Yes, The water cools down up to 30 degrees through most 100 ft hose runs an this is still OK to use. The nozzle is designed for water up to 5100 psi @ 212 degrees F (100 degrees C) at the tip.
Question: What is the difference between the 3000, 4000, and 5100 psi units?
Answer: For the 5000 psi turbo nozzle, it could work in the higher pressure situation and its material is thicker than 3000 psi and 4000 psi turbo nozzle. 5000 psi turbo nozzle's weight is much heavier. Overall a much longer lasting design with better safety in both hot water situations and higher pressures. The added thickness of the design also makes if better for impact situations if the nozzle hits the ground or some other object.
Question: Can I use this 5100 psi HOT for cold water and low pressure situations?
Answer: Yes
Optional:
Clean Storm Water Rotary Turbo Laser Nozzle 500 to 5100 psi HOT Heavy Duty 5.5 gpm 8.726-084.0 Rotojet [87260840] [87260840]
Steambrite's Rotary Turbo Nozzles - Clean Storm Water Rotary Turbo Laser Nozzle 500 to 5100 psi HOT Heavy Duty 5.5 gpm 8.726-084.0 Rotojet [87260840] [87260840] is .
If you can find a lower advertised price on the Clean Storm Water Rotary Turbo Laser Nozzle 500 to 5100 psi HOT Heavy Duty 5.5 gpm 8.726-084.0 Rotojet [87260840] [87260840] - 87260840,contact us at 210-662-9000,
and we will beat their price! Guaranteed!
rotobrush auto carpet extractor N/A air duct cleaning new york air duct cleaning denver truck mount carpet cleaning equipment host carpet cleaning supply
dehumidifier tag chimney cleaning equipment N/A truck mounts hard surface dehumidifier product review
truckmount N/A portable extractor commercial carpet extractor N/A ads carpet classifieds cleaning equipment free janitorsedge.ca drieaz dehus
boiler chemical cleaning carpet extractor for sale air cleaning equipment carpet cleaning equipment mount truck used carpet cleaning equipment professional panther truckmount N/A carpet cleaning supply N/A commercial cleaning equipment air duct cleaning new york
| Product Options |
| Add-ons: |
|
|
