DriStorm WRT-Wall Cabinet, Cavity, Floor, Stairwells, and Cabinet Warm Air Dryer 20180630

Factory Installed 7.5 Amp vacuum motor with 1300 hour extra long carbon brushes DriStorm 19811102 Wall Cavity Replacement Blower 5.7in Motor 125c /257F over temp protection 10" leads 7.5 amps 120 volts 84" Lift 151 CFM 12,684 vacuum units. Massive Extra Long Life Carbon Brushes 1300+ Hours Peripheral Bypass 5.7" Diameter 1 stage Super easy 10 minute vacuum motor change out, only 8 screws to remove the back cover and the motor is secured with 4 springs. Safety adds 30 degrees of heat and lowers the RH.

Factory Installed Admiral Water Temperature Gauge 50-300 degrees F Dial 2-1/4in 1/4in Mip Connection 78121560  0-300 degree thermometer displays the new temperature of the pressurized air. Once you know the temperature and relative humidity (RH) in the room as well as the new warmer temperature traveling in the wall, you will be able to calculate the new RH that is traveling inside the walls with a psychrometric chart.

Factory Installed Clean Storm 120 Volt Hour Meter Panel Mount SBM3AE11  Keep track of when 1300 Hours is up and it is time to change the vacuum motor carbon brushes.

Factory Installed Clean Storm Panel Mount 15 amp push button resettable breakers PP140624 PP33-900236 PHY018-003 [420815]  Breaker monitors both the GFCI outlet and the vacuum motor.

System Advantages:
Quad protection vacuum motor:
15 amp breaker, GFCI, 275 Degree F Internal motor shut down, 200  Degree Air Monitoring Shut down, Plus Overall Use Hour Meter Monitoring.
Largest, hardest blowing vacuum motor.
Build in Cord wrap.
No need to leaving tubing on machine when they are not needed.
Vacuum motor last 130% longer before needing carbon brushes.
Can be expanded to the next room.
Can use all existing accessories from all other manufactures and suppliers.
Vacuum motor can be changed out in less than 10 minutes.
Can be used to push or pull on the air or both!
Can produce desiccant RH and temperature quality air when mated with optional LGR dehumidifier and ducting.
Works with all brands of 1/2" OD (3/8" ID tubing) or even 3/8" OD (1/4" ID) tubing with optional fittings.
Daisy chain-able.
2 units can operate on a 20 amp breaker.
Must faster ROI that other systems.
Allows for the building materials to be dried without removal.
Size: 13-1/2"W X 18-1/2"L X 9-1/4"H
Weight: 20 lbs.

Works with all your existing tubing, hoses, mats and accessories from Injectidry Floor Drying System Package MI22

Works with all your existing tubing, hoses, mats and accessories from Mytee 2300 Whisper Dry (dri)i Wall Cavity Air Mover 115cfm 9amps 115volts (discontinued)

Works with all your existing tubing, hoses, from Viking PDS21 Pressurized Drying System AC8400 1687-2881

Works with all your existing tubing, hoses, mats and accessories from Drieaz F286 Rescue Mat System AC581

Works with all your existing tubing, hoses, mats and accessories from Injectidry MI26 HP PLUS Wall & Ceiling Drying Package

Works with all your existing tubing, hoses, mats and accessories from Drieaz F211-AK Driforce Inter Air Drying System Accessory Kit

Works with all your existing tubing, hoses, mats and accessories from Injectidry Wall and Ceiling Package MI20

Works with all your existing tubing, hoses, mats and accessories from Drieaz F211-BU Driforce Inter Air Drying System Base Unit

Works with all your existing tubing, hoses, mats and accessories from Drieaz F211 Driforce Inter Air Drying System

Works with Injectidry Water Separator AC8307

Tips:

DriStorm WRTWall Extension Tee Fitting 20180703                                                                                                                                  Expand your system.

Plastic Push in Tubing Reducer 1/2 in Plastic Stem X 3/8 OD Tubing 20514P                                                                                              Reduce the hose diameter to 1/4" ID X 3/8" OD

Plastic 1/2 inch Plug Stopper OD on stem 20160619  Purchase up to 27 stoppers to plug off the holes you do not need.                                                                                                              Not included with machine purchase.

DriStorm WRT-Wall Wall, Cavity, and Cabinet Drying Hose Extension with 16 Nozzles 20180627                                                                   Extends your WRT-Wall to the next room. Just add to the pressure side of the unit and open the gate valve.

Install on the back of the dehumidifier warm dry air and feed/ lay next to your DriStorm WRT-Wall to supercharge your drying performance. Clean Storm CSF382 8 inch X 15 ft Ducting for use with DefendAir Hepa 500 & EB1400 and Explosion Proof Air Movers SVH15 Ventilation Hose

DriStorm 3/8 ID X 1/2 OD X 500 Ft Nylon Flex Tubing for 200 degree Air for Wall Cabinet Cavity Driers 20180629

3/8in Barbed X 1/4in Barbed Plastic Hose Reducing Coupler Joiner [20180622] RF884 33406B                                                                    Reduce the hole size in the wall from 1/2" OD hose to 1/4" OD barbed insert Now you can extend to 123 openings per WRT-Wall machine.

3/8 in ID X 1/2 in OD Polybraid Rein Tubing X 300' - 8.704-753.0                                                                                                            Super economical 300 ft spool. Stiffer than the Nylon 20180629 tubing but a lot cheaper. Tubing softens up with the warm air.

Remove the rubber cap from the 20180627 and add the section below to move up to 32 ports, the re-install the cap.                                  DriStorm 20180623 Wall and Cavity Drying Extension Fitting

DriStorm Dehumidifier Booster Amplifier 20181009 Raises Temp and Lowers Relative Humidity                                                                 Video on link!

Turn your WRT-Wall into a water extraction vacuum booster by hooking the vacuum to the plugged dry side of the AC12H                         HydroForce AC12H Auto Dump Auto Pump Out Apo Filter Box System For Truckmounts and Portables 1620-2311