Part # |
Part |
Description |
Price |
S-10A |
1" Flexible Dry Fuel Line |
LPG or Natural Gas Line with 1" Npt fittings, 16" Long for 25-60KW |
$200 |
S-13C |
1000 Watt Engine Coolant Heater |
Coolant Heater with ON-OFF Thermostat. For 25-60KW |
$400 |
S-B600 |
600 CCA Starting Battery |
12 VDC Starting Battery / 600 Cold Cranking Amps |
$200 |
S-17BC |
Emergency Stop Switch Normally Closed |
"Mushroom" style STOP Switch mounted in NEMA-4X UL Listed Enclosure / Includes Clear Hinged Lift Cover |
$400 |
S-39 |
DC Enclosure Lights |
12 VDC Powered LED Cavity Interior Enclosure Service Lighting |
$575 |
S-39AC |
AC Enclosure Lights |
120 VAC Powered LED Cavity Interior Enclosure Service Lighting (Electrical Contractor to Supply Load Wires that are Circuit Protected from Building) |
$575 |
S-40 |
Liquid LP Fuel System |
Complete Liquid LP Carburetion System Installed |
$1667 |
S-41A |
Dual Fuel (LPG/NG) Automatic Fuel Switching |
As one dry fuel source ends, the second connected dry fuel source automatically continues nonstop operation! For 25KW - 150KW (Not available when using the S-40 Liquid LP system) |
$2243 |
S-78A |
Load Center |
Auxiliary Connection Box Frame Mounted. 120/240 1Ph Terminal Strips Only for Block Heater & Battery Charger Connection Upgrades. Electrical contractor to supply load wires that are circuit protected from building. |
$564 |
S-MD24 |
Motorized Dampers |
24"X24" HD 120-240 VAC Motorized Damper (Enclosure ventilation Control) |
$1667 |
S-112A |
Enclosure Door Restraints |
Service Door Restraints to hold doors open |
$552 |
S-114A |
Isolator Mounting Pad |
3"X6"X1/4" Thick Anti-Vibration Pads, 4 pack |
$225 |
S-EH3 |
Enclosure Space Heater |
3 KW, 1 Phase or 3 Phase Heater (Consult Rep for Voltage & Thermostat Requirements) |
$1580 |
ATSS13R-200-1-1 |
Service Entrance Rated Transfer Switch |
UL-1008 Certified Entrance Rated 2&3 Pole Industrial ASCO 185 Series Automatic Transfer Switch |
$2000 |
S-35A |
Aluminum Skid Base |
Separate, all aluminum bottom skid base, replacing standard steel skid 68" base |
$2000 |
S-37A |
Stainless Outer Housing |
Replace Standard Housing with all exterior, brushed stainless steel housing (perfect coastal accessory - looks cool too!) |
$2000 |
S-56 |
Winding Upgrade |
Special winding insulation system consisting of (3) individual dips and bake cycles of 100% solid varnish with final epoxy overcoat finish, plus fungus and moisture spray protection |
$700 |
S-59 |
Winding Upgrade |
Internal generator space heater, energized with 120/240 vac, keeping rotor and stator winding dry in humid conditions, during standby operation |
$525 |
S-122A |
R7 Foam Upgrade |
Upgrade foam to 2" R7 Foam + Noiseless metal sound dampener in exhaust chute. 4-5 dba additional sound reduction |
$1127 |
S-51A |
Frame Drip Pan |
Environmental Liquid Containment Pan Installed under frame base |
$750 |