DESCRIPTION A concentrated economical metal interlock floor finish that is perfect for high traffic areas. Dries to a very bright gloss and maintains easily with spray buffing or high speed burnishing without powdering. One gallon covers 2000 square feet. INSTRUCTIONS Dilute product as needed to produce desired finish percentage (Example: dilute 2 to 1 to produce 19% finish) then use in the following manner. Clean floor surface with a neutral detergent. If a stripper or alkaline detergent is used, rinse with clean water containing a neutralizer to insure proper coating and wear properties. Apply finish with an applicator or quality string mop generously without puddling to insure adequate protection and easy maintenance. For best results apply two or three coats, allowing polish to dry between coats (about 30 minutes depending on ventilation, humidity, and temperature). Porous surfaces should be sealed with an appropriate sealer or an extra coat of this finish. Maintain floor by daily sweeping or dust mopping. When necessary damp mop with a mild detergent. Recoat as desired. Spray buff only with a high speed system compatible with the finish to insure recoatability and performance. Strip only when necessary using a recommended stripper. Since build up is seldom a problem in busy areas recoat traffic lanes to insure uniform protection and beauty.
