HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D]

Click to enlarge

Your Price:

Part Number: AS08P-D
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 17.00

Download information on the HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D]

HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D]
Steambrite's Sprayer - HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D].
If you can find a lower advertised price on the HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D] - AS08P-D, contact us at 210-662-9000,
and we will beat their price! Guaranteed!

industrial carpet cleaning equipment basement dehumidifier comparison N/A janitorial cleaning equipment baked cleaning equipment floor providing industrial carpet cleaning equipment small dehumidifiercarpet extractor for sale carpet cleaning equipment industrial N/A edison dehumidifier chemical cleaning compound carpet extractor nexusjanitorial N/A ads carpet classifieds cleaning equipment free janitorsedge.ca wholesale carpet cleaning equipment N/A el lobo truckmount pipe cleaning equipmentcarpet dry cleaning supply air conditioner and dehumidifier phoenix dehumidifier professional carpet cleaning equipment cleaning filter equipment tank cleaning equipment N/A cleaning equipment tube N/A air cleaning duct equipment used part cleaning equipment

HydroForce AS08P-D: Injection Sprayer Plus High Pressure with blow molded jug 1639-0775

Used one time saves you 25% off. Only 1 at this price!

Description

The original injection sprayer (100 - 1,000 PSI). Finish Jobs Faster with Hydro-Force Injection Sprayers. For those that want an exceptional sprayer at a great price. The Hydro-Force Plus offers many of the great benefits of the Hydro-Force Pro injection sprayer including the same durable spray gun, stainless steel extension and long-lasting injection valve.

Features

Most affordable sprayer on the market
Operating pressure range of 100-1,000 PSI
Eliminates annoying mixing required by pump up sprayers

Specifications

Blow molded, 5 qt. transparent container
7 dilution ratios using metering tip kit NA0816A
Spray gun rated at 2600 PSI and 7 GPM
Chemically-resistant seals
18" stainless steel wand

Parts List
Manual

Video

Video Downloads

How To Clean You Injection Sprayer Filter Video
How to Repair or Rebuild the Injection Sprayer Trigger Valve Video

Compare to current or past OEM associations:

Multi-Sprayer INJ-6
8.697-413.0
86974130
PR101
AS08P
1639-0775
T-015
107379

Additional Information

General Function:

The Hydro-Force Injection Sprayer is based upon an injection system that consists of a specially designed valve that injects a concentrated chemical into the high-pressure water flow from the machine. Hydro-Force is designed for use with incoming water pressure of 400 PSI. The water flow is automatically reduced as it passes through the injector valve, thus reducing the pressure approximately 64%. To obtain the actual working pressure of your Hydro-Force Injection Sprayer, multiply your incoming pressure by 36%. The Hydro-Force Injection Sprayer is factory set to inject chemicals at a 1 to 8 ratio. Other chemicals may be used but should be prepared for a 1 to 8 dilution. The Hydro-Force pressure can be increased by putting a smaller jet at the end of the wand. This will, however, decrease the injection rate of your chemical. Your injection ratio may also change depending on the viscosity (thickness) of your chemical concentrate. The 1 to 8 ratio is based upon chemicals with a similar viscosity to water. The injection ratio can also be slightly affected by your main flow water temperature. This is generally not enough of a change to appreciably change the effectiveness of your system. We do, however, recommend the water temperature be kept below 200 degrees Fahrenheit, as higher temperatures can cause problems on the injection.

Pre-Spray and Traffic Lane Applications:

Hydro-Force Injection Sprayer eliminates the hassles of measuring and mixing. We recommend you keep an extra 5-quart container or two on your truck to make sure you never run out and to facilitate quick changes of your chemical containers. Remember that Hydro-Force Injection Sprayers automatically mixes at a 1 to 8 ratio. If your 5-quart container is full then that is the same as holding an 11-gallon pump sprayer of regular, ready to use pre-spray. We have found that Hydro-Force Injection Sprayers offer better penetration and overall coverage than most other sprayers. It is therefore possible to pre-spray your jobs up to 45 minutes before you reach that area to be cleaned. An effective way to use the Hydro-Force for pre-conditioning or small to medium jobs is to start at the door coming into the house, spraying all the traffic areas, working your way to the farthest point back in your job. You have then completed your pre-conditioning in just seconds and are prepared to hook up your wand and start cleaning your way out. Keep in that your Hydro-Force is spraying 3 to 4 times the amount of product your normal pump sprayer is putting out. This means you must move quickly to avoid over-applying. Protector should be applied in even, slightly overlapping strokes.

injection sprayer options

Optional

Be sure to purchase a couple of extra jugs, one for each chemical you like to use.
AS30 Injection Sprayer Empty Un-Marked Blow Molded Plain 5 Qt Sprayer Jug Solid Cap MP-UH18-EA PR110 1689-4762

HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D]
Steambrite's Sprayer - HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D] is .
If you can find a lower advertised price on the HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D] - AS08P-D,contact us at 210-662-9000,
and we will beat their price! Guaranteed!

tank cleaning equipment car restoration equipment N/A carpet cleaning equipment mount truck carpet cleaning equipment truckmount century 400 chemical cleaning ultrasonic ninja carpet cleaning machine auction cleaning equipment in michigan N/A carpet contained extractor carpet cleaning equipment for sale used carpet extractor dehumidifier rating N/A portable carpet extractor cleaning hospital equipment N/A dehumidifier rating commercial carpet cleaning equipment calorex dehumidifier dry foam carpet cleaning machine air duct cleaning cost dehumidifier sale car cleaning equipment roto brush N/A sears dehumidifier N/A carpet deep cleaning machine dehumidifier sale

Product Options

This product was added to our store on Wednesday 28 February, 2024.

Steambrite will ship the HydroForce AS08P-D, Demo Injection Sprayer Plus High Pressure, with blow molded jug 1639-0775 [AS08P-D] by either Fedex or Freight Quote, and are normally shipped within 1-10 working days. Please remember it takes 6-8 working days for you to receive your order after shipment, and ground shipping times are not guaranteed. Next day and two day service are available. Click here for our full shipping policy. Specifications subject to change without notice.