AR Pump SXWA4G50N Pump: 4/5100 1750RPM [SXWA4G50N]

Click to enlarge

Your Price:

Part Number: SXWA4G50N
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 32.00

Download information on the AR Pump SXWA4G50N Pump: 4/5100 1750RPM [SXWA4G50N]

AR Pump SXWA4G50N Pump: 4/5100 1750RPM [SXWA4G50N]
Steambrite's SXW series - AR Pump SXWA4G50N Pump: 4/5100 1750RPM [SXWA4G50N].
If you can find a lower advertised price on the AR Pump SXWA4G50N Pump: 4/5100 1750RPM [SXWA4G50N] - SXWA4G50N, contact us at 210-662-9000,
and we will beat their price! Guaranteed!

carpet deep cleaning machine lowes dehumidifier N/A air duct cleaning truck simplicity dehumidifier sewer builder cleaning equipment supply steam cleaning equipment manufacturerequipment chemical cleaning free N/A truckmount carpet cleaning machine carpet cart extractor commercial carpet extractorswimming pool dehumidifier N/A closet dehumidifier extractor portable truckforce N/A car restoration equipment castex carpet extractorsteam cleaning equipment air conditioning equipment system cleaning friedrich dehumidifier steam cleaning equipment manufacturer mytee carpet extractor santa fe dehumidifier N/A commercial air duct cleaning N/A seed cleaning equipment calorex dehumidifier

AR Pump SXWA4G50N Pump: 4/5100 1750RPM

Description

The Annovi Reverberi SXWA4G50N, N version 24mm solid shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The SXWA4G50N can produce up to 5000 Max PSI, 4 Max GPM, and is designed to operate at 1750 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the SXWA4G50N weighs in at 35 lbs and delivers the performance you demand.

Features

Manifold:
- Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety, performance.
- Inlet and Discharge Ports: Heavy bosses for added strength.
- Offset Discharge Ports: High efficiency, smooth flow.
- Bolts: Eight bolts, 10mm, grade 8.8.
Valves:
- Ultra Form Cages: Durable, strength, and long life.
- Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Valve Caps: Forged. Patented Valve Cap Design
Packing and Plungers:
- High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
- Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
- Support and Guides: Machined brass, 2-piece construction to assure proper plunger alignment and to maximize packing and seal life.
- Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Over sized for maximum life and load disbursement
Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
Crankcase: Precision die-cast, large cross head for strength, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: Heavy 2-piece special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 32 oz.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180ºF. Refer to breakdown.
Wet End Repair: Very simple no special tools required.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

Specifications

Weight	35 lbs.
Pump Orientation	Horizontal
Pump Head Material	Brass
Connecting Rods	Aluminum
Max GPM	4
Max L/Min	15.1
Max PSI	5000
Max Bar	345
Power EBHP	13.7
Bore Dia. (mm)	18
Stroke (mm)	12.2
CSID Stamp	5
Inlet (in)	1/2" F
Outlet (in)	3/8” F
Max Temp	140° F
Oil Capacity (oz.)	32
RPM	1750
Shaft Size	24mm
Shaf Version	Neutral Shaft
Shaft Type	Solid
Market	Commercial
Pump Type	Tri-Plex Plunger

AR Pump SXWA4G50N Pump: 4/5100 1750RPM [SXWA4G50N]
Steambrite's SXW series - AR Pump SXWA4G50N Pump: 4/5100 1750RPM [SXWA4G50N] is .
If you can find a lower advertised price on the AR Pump SXWA4G50N Pump: 4/5100 1750RPM [SXWA4G50N] - SXWA4G50N,contact us at 210-662-9000,
and we will beat their price! Guaranteed!

carpet chemical cleaning dry closet dehumidifier N/A carpet cleaning equipment uk wholesale carpet cleaning supply dehumidifier rating blast cleaning equipment carpet cleaning truckmount california carpet cleaning machine mount truck N/A atlantis carpet eureka extractor optiheat air cleaning equipment chimney cleaning equipment sewer builder cleaning equipment supply N/A chemical cleaning product commercial cleaning equipment N/A carpet cleaning equipment for sale aprilaire dehumidifier carpet cleaner truckmount carpet cleaning equipment mount truck best dehumidifier for basement whirlpool dehumidifier carpet extractor nexus rx-20 hydra master N/A agent chemical cleaning toiletries N/A air duct cleaning new york heated carpet extractor

Product Options

This product was added to our store on Monday 03 August, 2015.

Steambrite will ship the AR Pump SXWA4G50N Pump: 4/5100 1750RPM [SXWA4G50N] by either Fedex or Freight Quote, and are normally shipped within 1-10 working days. Please remember it takes 6-8 working days for you to receive your order after shipment, and ground shipping times are not guaranteed. Next day and two day service are available. Click here for our full shipping policy. Specifications subject to change without notice.