AR Pump XMA4G20E-F33 Pump: 4/2000 1750RPM [XMA4G20E-F33]

Click to enlarge

Your Price:

Part Number: XMA4G20E-F33
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 18.00

Download information on the AR Pump XMA4G20E-F33 Pump: 4/2000 1750RPM [XMA4G20E-F33]

AR Pump XMA4G20E-F33 Pump: 4/2000 1750RPM [XMA4G20E-F33]
Steambrite's XM/SXM Series - AR Pump XMA4G20E-F33 Pump: 4/2000 1750RPM [XMA4G20E-F33].
If you can find a lower advertised price on the AR Pump XMA4G20E-F33 Pump: 4/2000 1750RPM [XMA4G20E-F33] - XMA4G20E-F33, contact us at 210-662-9000,
and we will beat their price! Guaranteed!

carpet cleaning equipment uk equipment for resale N/A automotive carpet extractor car steam cleaning equipment cleaning equipment lease mississauga carpet cleaning machine comparisondehumidifier desiccant manufacturing dehumidifier home depot N/A dehumidifier pump ultrasonic cleaning equipment house dehumidifierrotobrush N/A amana dehumidifier swimming pool dehumidifier N/A chemical cleaning supply carpet extractorchemical cleaning pipe used carpet cleaning equipment commercial air duct cleaning carpet extractor part blast cleaning equipment laundry dry cleaning equipment N/A carpet cleaning supply N/A cleaning equipment business care,carpet cleaners,industrial mro,cleaning painting,cleaning supplies,carpet supply

AR Pump XMA4G20E-F33 Pump: 4/2000 1750RPM

Description

The Annovi Reverberi XMA4G20E-F33, E version 1-1/8" hollow shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The XMA4G20E-F33 can produce up to 2000 Max PSI, 4 Max GPM, and is designed to operate at 1750 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the XMA4G20E-F33 weighs in at 15 lbs and boasts a sleek compact design.

Features

Manifold:
- Forged Brass: Strength and no porosity equals long life. Higher hydrostatic pressures, safety and performance.
- Inlet and Discharge Ports: Heavy bosses for added strength.
- Offset Discharge Ports: High efficiency, smooth flow.
- Bolts: Eight bolts, 6mm, grade 12.9.
Valves:
- Ultra Form Cages: Durability, strength and long life.
- Poppets, Seat and Spring: 303 and 400 series stainless steel.
- Valve Caps: Machined brass – greater strength.
Packing and Plungers:
- High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
- Low Pressure Seals: “U” cup double lip Buna-N, good positive seal.
- Support Guides: Machined brass, two-piece construction to assure proper plunger alignment and to maximize packing and seal life.
- Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rods and crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and anodized (for maximum heat dissipation).
Rear Cover: precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
Plunger Rods: Stainless steel construction for strength (no plating to scrape off). O-ring plunger sealing system.
Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
Connecting Rods: One-piece special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Capacity: 14.5 oz., refer to parts breakdown.
Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180º F. Refer to breakdown
Wet End Repair: Very simple no special tools are required.
Mounting Bolt Pattern: Same on the top and bottom of the crankcase for simple drive side change.
Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

AR Pump XMA4G20E-F33 Pump: 4/2000 1750RPM [XMA4G20E-F33]
Steambrite's XM/SXM Series - AR Pump XMA4G20E-F33 Pump: 4/2000 1750RPM [XMA4G20E-F33] is .
If you can find a lower advertised price on the AR Pump XMA4G20E-F33 Pump: 4/2000 1750RPM [XMA4G20E-F33] - XMA4G20E-F33,contact us at 210-662-9000,
and we will beat their price! Guaranteed!

compare carpet cleaning machine boiler cleaning equipment N/A grain cleaning equipment carpet cleaning equipment mount truck used wholesale carpet cleaning supply gun cleaning equipment industrial carpet cleaning machine carpet deep cleaning machine N/A carpet chemical cleaning dry rug cleaning equipment home dehumidifier ebac dehumidifier N/A best home carpet cleaning machine maytag dehumidifier N/A atlantis carpet eureka extractor optiheat amcor dehumidifier dehumidifier review pool cleaning equipment compact dehumidifier air cleaning connecticut duct rotobrush carpet cleaning machine N/A carpet cleaning equipment truckmount N/A window cleaning equipment supply pool cleaning equipment

Product Options

This product was added to our store on Thursday 10 October, 2024.

Steambrite will ship the AR Pump XMA4G20E-F33 Pump: 4/2000 1750RPM [XMA4G20E-F33] by either Fedex or Freight Quote, and are normally shipped within 1-10 working days. Please remember it takes 6-8 working days for you to receive your order after shipment, and ground shipping times are not guaranteed. Next day and two day service are available. Click here for our full shipping policy. Specifications subject to change without notice.