AR Pump XMASS3G15E-F33 Pump: 3/2000 1750RPM [XMASS3G15E-F33]

Click to enlarge

Your Price:

Part Number: XMASS3G15E-F33
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 19.00

Download information on the AR Pump XMASS3G15E-F33 Pump: 3/2000 1750RPM [XMASS3G15E-F33]

AR Pump XMASS3G15E-F33 Pump: 3/2000 1750RPM [XMASS3G15E-F33]
Steambrite's XM-SS-Series - AR Pump XMASS3G15E-F33 Pump: 3/2000 1750RPM [XMASS3G15E-F33].
If you can find a lower advertised price on the AR Pump XMASS3G15E-F33 Pump: 3/2000 1750RPM [XMASS3G15E-F33] - XMASS3G15E-F33, contact us at 210-662-9000,
and we will beat their price! Guaranteed!

carpet cleaning extractor machine carpet cleaning machine N/A carpet extractor part residential carpet cleaning machine self contained carpet extractor auction cleaning equipment in michiganrx20 hydramaster 40 cfm dehumidifier soleus N/A simplicity dehumidifier air brookfield cleaning duct castex carpet extractorair cleaning duct sf N/A furniture cleaning equipment air cleaning conditioner duct N/A cleaning equipment pressure washer ultrasonic cleaning equipmentboiler cleaning equipment air brookfield cleaning duct air cleaning connecticut duct air duct cleaning equipment dryer vent cleaning equipment hockey equipment cleaning N/A carpet cleaning commercial equipment N/A humidifier dehumidifier chemical cleaning exchanger heat

AR Pump XMASS3G15E-F33 Pump: 3/2000 1750RPM

Description

The Annovi Reverberi XMASS3G15E-F33, E version 5/8" hollow shaft triplex pump is ready for direct or pulley driving. This pump is manufactured with a brass pump head suitable for a wide range of conditions. The XMASS3G15E-F33 can produce up to 2000 Max PSI, 3 Max GPM, and is designed to operate at 1750 RPM. Constructed with frictionless aluminum connecting rods and ceramic pistons, the XMASS3G15E-F33 weighs in at 17 lbs and boasts a sleek compact design.

Features

Manifold:
- 316L - Stainless Steel Block Style: Strength and no porposity = long life.
- Inlet and Discharge Ports: 1/2” inlet and 3/8” discharge.
- Offset Discharge Ports: High efficiency, smooth flow
- Bolts: 8 Bolts, 6mm, stainless steel.
Valves:
- Ultra Form Cages: Durable, strength, and long life.
- Poppets, Seat and Spring: 316 series stainless steel.
- Valve Caps: Machined 316L.
Packing and Plungers:
- High Pressure Packing: “V” style (D-1) Viton (cotton duct weave base) strong and tightens under load.
- Low Pressure Seals: “U” cup double lip Viton, good positive seal.
- Support and Guides: Machined stainless steel, 2-piece construction and back-up ring to assure proper plunger alignment, maximize packing and seal life.
- Plungers: Special aluminum oxide blend, solid ceramic long life, strong and durable.
Bearings: Oversized for maximum life and load dispercement, needle bearing on the drive side and ball on the non-drive side. Each bearing is held in position on the crankshaft and crankcase by snap rings. This assures positive alignment and centering of the connecting rodsand crankshaft in relation to the crankcase, it also eliminates the crankshaft from floating.
Crankcase: Precision die-cast, large cooling fins and covered with a special anti-corrosion finish.
Rear Cover: Precision die-cast, O-Ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen). This is an “AR” original. Oil drain plug.
Plunger Rods: Stainless steel construction for strength, back-up and O-ring plunger sealing system with SST slingers.
Rod Pins: Precision ground and hardened steel, oversized for load dispersement.
Connection Rods: 1-piece special allow bronze for higher pressures, oversized for maximum strength, load dispersement, and life. Heavy pin area construction.
Crankshaft: Forged, precision ground and hardened for extremely long life and durability. Available in 5/8” hollow shafts drive. Shaft key set screws are standard on high-speed version for long shaft life. Mounting flange is 56-C face.
Oil Seals and O-Rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
Oil Drains: Two (2). One in the rear cover and one in the bottom of crankcase
Oil Capacity: 14 oz.
Dyno Proven: All pumps are dyno tested to assure the theroretical design meets the actual design.
Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
Hot Water: High temperature kits are available to 180°F.
Wet End Repair: Very simple no special tools are required.
Two Oil Drain Plugs: Rear cover and crankcase bottom.
Mounting Flanges: Multiple flanges are available.
Mounting Bolt Pattern: On top and bottom of the crankcase for shaft reversal.
Buna-N: Elastomers available.

Specifications

Weight	17 lbs.
Pump Orientation	Horizontal
Pump Head Material	Stainless Steel
Connecting Rods	Aluminum
Max GPM	3
Max L/Min	11.4
Max PSI	2000
Max Bar	140
Power EBHP	4.12
Bore Dia. (mm)	15
Stroke (mm)	13.2
CSID Stamp	3
Inlet (in)	1/2” F
Outlet (in)	3/8” F
Max Temp	140° F
Oil Capacity (oz.)	14.5
RPM	1750
Shaft Size	5/8”
Shaft Version	Electric Shaft
Shaft Type	Hollow
Specialty	Stainless Steel
Flange	F33
Market	Specialty
Pump Type	Tri-Plex Plunger

AR Pump XMASS3G15E-F33 Pump: 3/2000 1750RPM [XMASS3G15E-F33]
Steambrite's XM-SS-Series - AR Pump XMASS3G15E-F33 Pump: 3/2000 1750RPM [XMASS3G15E-F33] is .
If you can find a lower advertised price on the AR Pump XMASS3G15E-F33 Pump: 3/2000 1750RPM [XMASS3G15E-F33] - XMASS3G15E-F33,contact us at 210-662-9000,
and we will beat their price! Guaranteed!

carpet extractor house dehumidifier N/A consumer report dehumidifier blind cleaning equipment auto carpet extractor low temperature dehumidifier houston air duct cleaning industrial carpet cleaning equipment N/A cleaning equipment pressure washer small carpet cleaning machine extractor portable truckforce panther truckmount N/A truck mount carpet cleaning equipment tank cleaning equipment N/A portable carpet extractor carpet cleaning equipment steam air cleaning duct equipment used carpet cleaning machine manufacturer truck mount carpet cleaning machine air clean duct equipment sale blind cleaning equipment mytee carpet extractor N/A chemical cleaning product N/A industrial carpet cleaning equipment air duct cleaning equipment

Product Options

This product was added to our store on Tuesday 04 August, 2015.

Steambrite will ship the AR Pump XMASS3G15E-F33 Pump: 3/2000 1750RPM [XMASS3G15E-F33] by either Fedex or Freight Quote, and are normally shipped within 1-10 working days. Please remember it takes 6-8 working days for you to receive your order after shipment, and ground shipping times are not guaranteed. Next day and two day service are available. Click here for our full shipping policy. Specifications subject to change without notice.