AR Pump XWA9G24N-CR Pump: 9/2400 1750RPM

Description

The Annovi Reverberi (AR) Plunger Pump XWA9G24N-CR is a high-power and efficient plunger pump that operates at an impressive 1750 RPM. Built for robust and heavy-duty performance, it ensures durability with its sturdy construction and delivers unmatched performance. With its high precision, it's ideal for applications where significant pressurization is required.

This exceptional AR plunger pump can be effectively used in a gamut of applications. It is perfect for high-pressure cleaning operations, including commercial cleaning and pressure washing. It can be used in industrial or agricultural spraying owing to its high precision and regulation. Exceptionally fitted for water treatment processes, it assists in filters backwashing and descaling. It works efficiently in cooling and AC systems. Additionally, it can be used in road or construction washing to maintain clean and safe working conditions.

• Manifold:
• - Forged Brass: Strength and no porosity – long life. Higher hydrostatic pressures – safety, performance.
• - Inlet and Discharge Ports: Heavy bosses for added strength.
• - Offset Discharge Ports: High efficiency, smooth flow.
• - Bolts: Eight bolts, 10mm, grade 8.8.
• Valves:
• - Ultra Form Cages: Durable, strength, and long life.
• - Poppets, Seat and Spring: 303 and 400 series stainless steel.
• - Valve Caps: Forged. Patented Valve Cap Design
• Packing and Plungers:
• - High Pressure Packing: “V” style (D-1) Buna-N (cotton duct weave base) strong and tightens under load.
• - Low Pressure Seals: “U” cup double lip Buna-N for a good positive seat.
• - Support and Guides: Machined brass, 2-piece construction to assure proper plunger alignment and to maximize packing and seal life.
• - Plungers: Are a special aluminum oxide blend, solid ceramic for long life, strong durability and more resilient.
• Bearings: Over sized for maximum life and load disbursement
• Bearing Support: Precision die-cast and machined to assure concentricity and alignment.
• Crankcase: Precision die-cast, large cross head for strength, large cooling fins and anodized (for maximum heat dissipation).
• Rear Cover: Precision die-cast, O-ring sealed and bayonet style sight glass for positive sealing and locking (no threads to loosen).
• Plunger Rods: Stainless steel construction for strength (no plating to scrape off), back-up and O-ring plunger sealing system.
• Rod Pins: Precision ground and hardened steel, oversized for load disbursement.
• Connecting Rods: Heavy 2-piece special alloy aluminum based, oversized for maximum strength, load disbursement, and life. Heavy pin area construction, for added load strength.
• Crankshaft: Forged, precision ground and hardened for extremely long life and durability.
• Oil Seals and O-rings: All are constructed of Buna-N rubber. The O-rings have stainless steel garder springs to assure constant tension on the sealing surface.
• Oil Capacity: 32 oz.
• Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
• Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
• Hot Water: High temperature kits are available to 180ºF. Refer to breakdown.
• Wet End Repair: Very simple no special tools required.
• Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.

Specifications