Pumptec 81662 Series 207V-085/M9253F 120v BUNA M-VALVE 4 - 1/4in Ports Gold or Black 500 psi
Nilfisk Hydramaster Advanced US Products Pex Pump 56113117

Specification

• Series 207V - 085 Cam /M9253F Motor Pump Assembly
  
• 120 Volt
  
• 500 PSI
  
• Recommended '02 Nozzle (dual 01 nozzles, not included)
  
• .72 GPM Spray
  
• 2.8 AMPS Spray
  
• 22 lbs
• Pump is 9" W X 11" L X 5" H
• Pump head Can ship in black, blue, or gold color (all the same thing, customer is not allowed to pick the color)
• Pump usually installed upside down in a Nilfisk machine.  Please check your water in and out connections (this means you might have to unbolt the head from the motor, flip the pump head 180 degree, then bold back onto the motor!)

	Required for Normal Operation !! Factory DOES NOT INCLUDE THIS IMPORTANT REQUIREMENT PLEASE ADD TO YOUR ORDER! Bridge Rectifier for Edic, PumpTec, Burnishers, & More
	Pump Assembly includes one each of the items below
	Factory Installed Pumptec: M9253F Motor Only Replaces the Old M53
	Factory Installed Pumptec: Repair Kit "C" Cam Bearing for 400-500 Psi Models 204V, 205V, 207V, 217V .085 Stroke Replaces 0100-6005-0085
	Factory Installed Pumptec: 207V Pump Head Only with special 1/4" fitting instead of the normal 3/8" fittings
	Factor Included Pumptec Kit, Base Mounting Plate / Bracket For M20/M53/M54 Motors (Included but not installed)

Compare to and replaces Current or past OEM Associations:

B09WZ35RTR
56113117
120V 500PSI pump 372-1267
56113074

Factory installed in US Products Pex 500, Nilfisk-Advance ET700, Clark EX30

Brochure

Owners Manual for 205 and 207 series

Optional

	Optional 3/8" Fip X 1/4" Mip Brass Bushing Adapter **Does your original pump have or use 1/4" connections or 3/8" pipe connections? If so you might want to purchase some of these bushing to convert 1/4" pipe to 3/8" pipe connections. Please note a 1/4" pipe with a ruler is 1/2" across OD and 3/8" pipe is 5/8" OD. On some Kaivac, US Products, Hydramaster, Advance, and Nilfisk machines have installed 1/4" connections and no bushing required.  The Pumptec 204v series head installed originally is also 1/4"  Most machines today use the 3/8" connection system (see optional pump below.)
	Optional Pumptec: Series 205V 204v, 207v 500 PSI Upgrade Kit You will need this kit to convert a lower pressure system 50 - 220 psi to a standard 500 psi carpet cleaning machine.
	Video On Link Optional Pumptec: Repair Kit for 500-510 Models Brass Pressure Regulator C-500/510-KIT_RR
	Optional Pumptec 205V and 207V Triple Repair Pump Head Rebuild Kit Required change every 500 hours by factory.

Optional Pumptec 81275 Series 207V-085/M9253F 120v BUNA M-VALVE 4 - 3/8in Ports Gold 500 psi G13102 8.620-105.0 250-74 80547  Similar pump but all 4 water connection are 3/8" pipe instead of 1/4" pipe.  Please select the correct pump when you place your order to avoid a restocking fee or to have to purchase bushings.