It also helps to save on chemical usage during cleaning and even contributes to better overall cleaning results, leaving carpet feeling soft and fluffy when it dries. You may notice that your chemicals are more effective at removing dirt and soiling, even when used at lower concentrations.
The EZ-Charge Water Softener removes the calcium and magnesium minerals from the water and replaces them with sodium, which does not form a scale or interfere with detergent performance. This compact, light, and efficient water softener has the capacity to regenerate over 1,000 gallons of softened water per softening run (based on a water hardness of 10 grains).
There are many factors which determine how long the water softener can operate between regenerations
Remember, the harder the water in your area, the more frequently the system will need to be recharged.
The EZ-Charge Water Softener requires no electrical source for regeneration. It can be recharged anytime and anywhere there is a fresh water source.
The EZ-Charge Water Softener works with any make of truck mount. It's easy to use and easy to install.
The chart below gives the amount of softened water supplied based on the water hardness that enters the system.
*If the output water from the system reaches 5 grains of hardness (filtered drinking water), the system should be recharged.
The EZ-Charge Water Softener is recommended for use with inlet water temperatures of up to 125° F (52° C). Temperatures above 125° F (52° C) may damage the unit permanently and void the warranty.
Manual/Schematic
