Shertech GCBN33V, Gear Pump [GCBN33V]

Click to enlarge

Your Price:

Part Number: GCBN33V
Guaranteed: We will beat their price!
Quantity:
Estimated shipping cost: $ 29.00

Download information on the Shertech GCBN33V, Gear Pump [GCBN33V]

Shertech GCBN33V, Gear Pump [GCBN33V]
Steambrite's Shertech Pumps - Shertech GCBN33V, Gear Pump [GCBN33V].
If you can find a lower advertised price on the Shertech GCBN33V, Gear Pump [GCBN33V] - GCBN33V, contact us at 210-662-9000,
and we will beat their price! Guaranteed!

truck mount rx20 hydramaster N/A truckmount carpet cleaning machine carpet rug cleaning equipment supply wholesale All Cleaning Equipment truckmount carpet cleaning machinecarpet extractor wand chemical cleaning earth free friendly product N/A carpet cleaning commercial equipment maytag dehumidifier truck mount carpet cleaning equipmentsears dehumidifier N/A air duct cleaning denver air duct cleaning new york N/A santa fe dehumidifier air cleaning conditioning duct heating systemchemical cleaning supply cleaning chemical car cleaning equipment air cleaning duct equipment used agricultural cleaning equipment supply oasis dehumidifier N/A carpet cleaning equipment truckmount N/A chemtex panther cleaning equipment pressure washer

High Performance Gear Pumps

Shertech® gear pumps have various capabilities including flow rates up to 24 gpm, pressures up to 200 psi, fluid temperatures up to 400º F and viscosities up to 100,000 SSU.

Both close-coupled and pedestal-mounted pumps are offered in three materials of construction.

316 Stainless Steel can be specified for pumping clean, hard-to-transfer, high-temperature and/or highly-corrosive liquids. Cast iron and bronze meet the requirements of transferring a broad range of non-abrasive fluids, including oil and water-based fluids, respectively. Two gear types are available, spur (or straight) and helical. Spur gears provide excellent suction lift and are great for water or light oils. Helical gears have a non-clogging design and are capable of handling higher viscosity fluids.

Shertech pumps are simple in construction, with a minimum number of moving parts for less maintenance and longer life. Design features include mechanical seals, seal chambers with flush ports, oversized carbon graphite bushings, integral ball bearings and piston relief valves.
Used as Hewlett Packard External Gear Pump too.

Manufacturer Part No.	GCBN33V Owners Manual
UNSPSC	40151551
Manufacturer	HYPRO LLC
Notes	Shertech self-priming, positive displacement, external rotary gear pumps are ideal for a wide range of intermittent and light-duty industrial, marine, agricultural, and commercial applications, providing a nearly pulseless flow. Close-coupled models are directly mounted to NEMA framed, AC ODP single-phase, thermally overload-protected motors. All models include a pressure relief valve. Motor-driven models are HP configured to handle up to 500 SSU at 100 psi (specific gravity of 1.0). Uses: For use with non-particulate and non-abrasive fluids compatible with pump wet-end construction component materials. Flows to 4.4 gpm. Max. RPM: 1725. Max. PSI: 100. Maximum viscosity of 500 SSU at 1725 RPM (max. input torque of 45 in/lb). Pumps can operate bi-directionally (reversible). In reverse operation, the pressure relief valve will not function. Temperature ranges from -20° to 210°F. Maximum working pressure: 150 psi.
Applications	CARBONATOR-MOUNT CAST IRON PUMPS (INTERMITTENT DUTY) - Specifically designed for use with oil-based fluids. Not to be used with water-based fluids. Pumps include steel spur gears with steel shafts and cast iron shaft support; standard pressure relief valves that can be ported internally or externally and a Viton® mechanical carbon/ceramic-faced seal with temperature range of 32° to 280°F. Wet-end parts are constructed from cast iron, steel, stainless steel (302, 303 and/or 18-8), carbon, ceramic, and Viton®.CARBONATOR-MOUNT BRONZE PUMPS (INTERMITTENT DUTY) - Excellent for water-based fluids. Feature 303 stainless steel shafts, carbon graphite bushings, and Buna-N mechanical carbon/ceramic faced seal with a temperature range of -20° to 210°F. Standard pressure relief valves can be ported internally or externally. Wet-end parts are constructed from bronze, brass, stainless steel (302, 303 and/or 18-8), graphite, carbon, and Buna-N.

also marketed under part number(s) 0474192

Maximum Flow		4.4 gallons/min
TDH (Head) Maximum @ 0GPM		100 PSI
Head (TDH) Maximum @ 0GPM		231 FT
HP Standard		0.5 HP
Inlet Connection Type		FNPT
Inlet		0.38 "
Outlet Connection Type		FNPT
Outlet		0.38 "
Wetted Materials		304SS
		Bronze
Elastomers		Buna-Nitrile
Voltage		115/230 V
Phase		1
Frequency		60 Hz
Motor		ODP
Motor Amps		6.8 / 3.4 A
Speed		1725 RPM
MTR Cord Length		0 FT
Self Priming		Yes
Suction Lift		3 FT
Max Operating Temp		210 °F
Viscosity		SAE 10 oil 88.00 cp 500.00 ssu
Max. Particle Size		0.03 "
Max. Particle Hardness		2 MOH
Max. Volume of Suspended Solids		0 %
Shaft		304SS
Mechanical Seal Face		Carbon-ceramic
Mechanical Seal Type		Single
Pump Bearing		Carbon/graphite
Motor Bearings		Ball
Impeller Mat'l / Type		Bronze gears
Warranty		1 Year/s
Applications		Flooded Suction
		Coolant
		Cooling
		Constant Pressure
		Dosing
		Fuel Oil
		High Pressure
PH High		8 pH
Other		Self priming with wetted gears
Country of Origin		USA
Duty		Inter.
Weight		22 lbs

Shertech GCBN33V, Gear Pump [GCBN33V]
Steambrite's Shertech Pumps - Shertech GCBN33V, Gear Pump [GCBN33V] is .
If you can find a lower advertised price on the Shertech GCBN33V, Gear Pump [GCBN33V] - GCBN33V,contact us at 210-662-9000,
and we will beat their price! Guaranteed!

air cleaning connecticut duct portable carpet cleaning equipment N/A pressure cleaning equipment dehumidifier rating rx20 hydramaster century 400 truckmount carpet cleaning machine 40 cfm dehumidifier soleus N/A the rug doctor carpet cleaning machine ge dehumidifier panther truckmount air brookfield cleaning duct N/A drizair 1200 dehumidifier janitorial cleaning equipment N/A air duct cleaning new jersey air duct cleaning chicago lg dehumidifier 1700 aprilaire dehumidifier home model whole tank cleaning equipment manufacturer automotive carpet extractor munters dehumidifier air duct cleaning equipment N/A carpet chemical cleaning dry N/A carpet extractor nexus carpet cleaning machine comparison

Product Options

This product was added to our store on Friday 20 August, 2010.

Steambrite will ship the Shertech GCBN33V, Gear Pump [GCBN33V] by either Fedex or Freight Quote, and are normally shipped within 1-10 working days. Please remember it takes 6-8 working days for you to receive your order after shipment, and ground shipping times are not guaranteed. Next day and two day service are available. Click here for our full shipping policy. Specifications subject to change without notice.