This Item Ships on a Pallet.
3003-A6L2CV1A

• Carpet Cleaning
• Dairy Milking
• Mosquito Fogging
• Wastewater Aeration
• Trenchless Drilling
• Air Sparging
• Compost Aeration
• Vacuum Cleaning
• Dust Collection

Features:

• Gears: Helical gearing for quiet operation
• Bearings:
  • Gear End: Double row ball
  • Drive Shaft: Cylindrical roller
• Rotors: Ductile iron, integrally cast with shafts
• Lubrication:
  • Gear End: Oil splash
  • Drive End: Grease
• Seals: Lip
• Low noise option available on most models
• Flow range: 6 - 2300 CFM (10 - 3900 m³/h)
• Pressure range: up to 15 PSIG (1.03 bar g)
• Vacuum range: up to 16" Hg (540 mbar g)
• Every unit tested before shipment

• Model 3003 Performance Curves

Tuthill Pipe thread connections required

Rotary Positive Gas Blowers

Splash Oil Lubrication at One End

Helical Gearing

Stronger Bearings

Rotors with Integral Shafts

Model sizes 3002, 3003, and 3006 are supplied with a 7/8" diameter drive shaft.  when replacing equivalent Roots or Sutorbilt models, the Competitor models require larger bore on the blower sheave bushing or coupling half from smaller 3/4" drive shaft of equivalents Roots or Sutorbit model replaced. 

Positive End Clearances

End clearances are positively established at the blower gear end,
eliminating the risk of shifting end clearances when installing or
removing drive components. This also eliminates the need for
those special fork and saddle tools required by other brands to
reset end clearances.

Polished Drive Shaft Sealing Surfaces

Driveshaft is polished to reduce seal wear and risk of leakage.

Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty:

Type of Application
Atmospheric Air or Process Air without Liquids Present:	Process Gases Other than Air, or Any Liquid Injected Application:
24 months from date of shipment, or 18 months after initial startup date, whichever occurs first.	18 months from date of shipment, or 12 months after initial startup date, whichever occurs first

The factory does not paint the blower.  

They only apply a light primer spray to slow down rusting.  

When you open the box all new blowers are rusted.
If you want us to take the blower out of the box and paint it, please let us know and we can do this for an extra fee. 

Tuthill Blower Brochure
Important Option

Oil level must be topped off on new blowers Oil level must be changed after 50 hour break in period. Oil level must be changed every 200 hours after break in period. Gardner Denver 28G46 Brand Blower Oil Aeon PD-XD Full Synthetic Formula Extra Heavy Duty for High Heat Applications 28G47-QT  Add to your shopping cart now!