COMPETITOR PLUS™ blowers are designed to be interchangeable with equivalent sizes of Roots Universal RAI®, and many Sutorbilt® California Series B and F, and Legend™ Series L and P blowers. COMPETITOR PLUS models are rated up to 15 PSIG discharge pressure or 16" Hg dry vacuum. In addition to interchangeability, Competitor Blowers have superior features ordinarily found only on premium blowers - see table below.
Performance Specifications:
- Pressure range: up to 15 PSIG (1.03 bar g)
- Vacuum range: up to 16" Hg (540 mbar g)
- 530 CFM @ 3600 RPM
Material Specifications:
- Housing: Cast iron
- End Plates: Cast iron
- End Cover: Cast iron
- Rotors: Ductile iron
- Shafts: Ductile iron, cast integrally with rotors
- Drive Shaft: Ductile iron, cast integrally with drive rotor
- Gears: Heat treated alloy steel, helical cut
- Seals: Lip seals on rotor shafts and drive shaft
- Lubrication: Oil splash on gear end, grease on drive end
- Bearings:
- Gear end: Double row ball, both rotors
- Drive End: Cylindrical roller on drive rotor, Single row ball on driven rotor
-
|
|
|
Timed with hardedened, precision helical gears, keyed to the rotor shafts (NOT taper fit spur gears as offered by all other manufacturers, which have greater backlash, and can slip and lose timing). Helical gears are quieter, reducing mechanical noise. |
|
| |
|
|
|
|
|
|
For increased strength compared to single row bearings offered by competing brands. This feature increases bearing life by as much as 50% compared to competing brands. |
|
| |
|
|
|
- Rotors with Integral Shafts
|
|
COMPETITOR PLUS™ blowers are available in two-lobe or tri-lobe variations. The tri-lobe variation offers reduced pulsation and lower noise levels. The two-lobe variation is ideal for processes with heavy contamination. For vibration free operation all rotors are dynamically balanced. Shafts are integral to the rotors, which prevents loosening over time. |
|
| |
|
|
|
|
|
|
Eliminates the risk of shifting end clearances when installing or removing drive components. |
|
| |
|
|
|
- Polished Sealing Surfaces
|
|
All shaft surfaces in contact with sealing members are polished to reduce seal wear and risk of leakage. |
|
| |
|
|
|
|
|
|
Every COMPETITOR PLUS™ blower is factory tested to assure you of the highest quality. While some manufacturers perform only sample testing, we go the distance to insure that your blower meets our rigid ISO 9001 registered quality standards. |
Carpet Cleaning, Dairy Milking, Mosquito Fogging, Wastewater Aeration, Trenchless Drilling, Air Sparging, Compost Aeration, Dust Collection, Vacuum Cleaning
.jpg)
This can be used an exact drop in replacement for Dresser Roots URAI #47 vacuum blower (same footprint, same dimensions, same port openings). Shaft diameter is 7/8".
Shipping weight: 140#
Shipping Dimensions:
25x21x26H
Applications:
- Carpet Cleaning
- Dairy Milking
- Mosquito Fogging
- Wastewater Aeration
- Trenchless Drilling
- Air Sparging
- Compost Aeration
- Vacuum Cleaning
- Dust Collection
Features:
- Gears: Helical gearing for quiet operation
- Bearings:
- Gear End: Double row ball
- Drive Shaft: Cylindrical roller
- Rotors: Ductile iron, integrally cast with shafts
- Lubrication:
- Gear End: Oil splash
- Drive End: Grease
- Seals: Lip
- Low noise option available on most models
- Flow range: 6 - 2300 CFM (10 - 3900 m³/h)
- Pressure range: up to 15 PSIG (1.03 bar g)
- Vacuum range: up to 16" Hg (540 mbar g)
- Every unit tested before shipment
- Model 4007 Performance Curves
Rotary Positive Gas Blowers
Designed with features found ordinarily on high-end
blowers, COMPETITOR GT blowers are still designed to be
interchangeable, with respect to foot print, shaft height and
diameter, with equivalent sizes of Roots Universal RAI-G®, and
many Sutorbilt® California Series Legend™ Series L and P, as
well as M-D Pneumatics COMPETITOR PLUS™ blowers.
Splash Oil Lubrication at One End
COMPETITOR GT blowers include splash oil lubrication at gear side and grease on shaft side.
Helical Gearing
COMPETITOR GT blowers are timed with hardened, precision
helical gears, keyed to the rotor shafts, not taper fit spur gears
offered by other manufacturers which have greater backlash,
and can slip and lose timing. Helical gears are also quieter,
further reducing mechanical noise.
Stronger Bearings
All COMPETITOR GT blowers include double row ball bearings
at the gear end, stronger than single row ball bearings offered by
other manufacturers. Drive shaft bearing is cylindrical roller type
for additional strength against side loading from V-belt drives.
As a result of this superior design, COMPETITOR GT blowers
offer significantly longer bearing life than models offered by
other manufacturers.
Rotors with Integral Shafts
COMPETITOR GT blowers include precision machined ductile
iron rotors with large, integrally cast shafts, not press fit and/or
pinned shafts offered by other manufacturers, which can loosen
over time and cause rotor clash. All rotors are dynamically
balanced for vibration-free rotation.
Positive End Clearances
End clearances are positively established at the blower gear end,
eliminating the risk of shifting end clearances when installing or
removing drive components. This also eliminates the need for
those special fork and saddle tools required by other brands to
reset end clearances.
Polished Drive Shaft Sealing Surfaces
Driveshaft is polished to reduce seal wear and risk of leakage.
Every Tuthill blower is backed by the Tuthill Vacuum & Blower Systems limited warranty:
| Type of Application |
|
Atmospheric Air or Process Air without Liquids Present:
|
Process Gases Other than Air, or Any Liquid Injected Application: |
|
24 months from date of shipment, or 18 months after initial startup date, whichever occurs first.
|
12 months after sale
|
| The COMPETITOR PLUS™ has been engineered and designed to fit right into your existing process without any modification, and at a lower cost than Roots, Sutorbilt, or Gardner Denver. |
| |
| Competitor Plus |
Roots Model |
Sutorbilt Model |
Port Connection |
Blower Weight |
| 2002 |
22 URAI |
2M |
1" NPT |
41 lbs |
| 2004 |
24 URAI |
2L |
2" NPT |
53 lbs |
| 3002 |
32 URAI |
3H |
1.25" NPT |
78 lbs |
| 3003 |
33 URAI |
3M |
2" NPT |
83 lbs |
| 3006 |
36 URAI |
3L |
2.5" NPT |
113 lbs |
| 4002 |
42 URAI |
4H |
1.5" NPT |
|
Drop in replacement for: Roots URI 47 and Sutorbilt 4L
Owners Manual
Outline Sheet
Spec Sheet
 The factory does not paint the blower.
They only apply a light primer spray to slow down rusting.
When you open the box all new blowers are rusted.
If you want us to take the blower out of the box and paint it, please let us know and we can do this for an extra fee.
.
Important Option
Tuthill 4007-21T2 Competitor Blower Top Shaft [4007-21T2]
Steambrite's Blowers and Vacuum Pumps - Tuthill 4007-21T2 Competitor Blower Top Shaft [4007-21T2] is .
If you can find a lower advertised price on the Tuthill 4007-21T2 Competitor Blower Top Shaft [4007-21T2] - 4007-21T2,contact us at 210-662-9000,
and we will beat their price! Guaranteed!
carpet cleaning machine manufacturer chemical cleaning etc pressure system whol N/A dehumidifier sale ninja carpet cleaning machine dehumidifier part carpet cleaning supply 1
castex carpet extractor air duct cleaning company N/A portable carpet cleaning machine home air duct cleaning castex carpet extractor
carpet cleaning supply and machine N/A truckmount carpet cleaning machine dehumidifier repair N/A holmes dehumidifier professional carpet cleaning machine
comfort aire dehumidifier ultrasonic cleaning equipment carpet deep cleaning machine home dehumidifier authorized chemical cleaning organic run carpet cleaning equipment for sale N/A mold remediation N/A cleaning system equipment rental cleaning equipment rental
| Product Options |
| Shipping Surcharges: |
|
|
