

Westpak 7/16" ID X 6" Teflon Wand Glide for Low Profile Carpet Cleaning Wands
Note you might have to silicone the glide all the way around the perimeter for tighter air seal.
Inside clearance of glide is 7/16"
Use bench grinder or knife to trim fit edges and corners as needed.
Air slots improve air flow over older drilled hole design.
.jpg)


Question: I have a question regarding the glide on my wand. What do you recommend I use to create a seal and semi-permanently affix the glide to the wand? I want to be able to remove it when it wears out without having a permanent residue of glue on the wand, but at the same time I can't have it falling off all the time. Do you have a recommendation? Thanks.
Answer: I used the clear 100% silicone from Walmart.
About $5-$6 a tube (in a caulk gun).
Clean stainless with rubbing alcohol first.
When you want to change out the glide (after 6 months), you can score the silicone with a knife and reclean and re-glue the wand with a new one.
|