

Mini disk thermostat. This unit does NOT have the reset button in the middle. This is a "normally closed circuit" set to turn off (open the circuit) the electricity at 200 degrees on the outside of the heater. This means the water is about 205 degrees on the inside of the heater.
115 volts.
Used min most brands of extractors including Mytee, Ninja, Diamondback, Prochem, Shazaam, PowerFlite, Jamco, TMI, Namco, Chemtex, more...
We recommend that if you have a push button restable thermostat that you replace it with an automatic one. Many machines with come with one automatic and one push button. The machines perform better in the long run if both are automatic.
Also marketed under part number Karcher 86317510, 130-14D, 8.631-751.0
This requires that the solderless connections be replaced.
Please note it is NOT OK to use 12 volt rated automotive connectors made out of vinyl.
You must use nylon connectors instead rated for 120 volts.
Using the wrong connections can cause your machine to catch on fire!
20110921JH1500/4/1470/8/1440/12/1411
|